Page 1 of 2

How to run the TurboGrafx-16 / PC Engine version

Posted: July 20th, 2014, 9:46 am
by David
I had a hard time finding the few working emulators, so I post the results here.

First, you need the game itself: http://doperoms.com/roms/turbografx_16_ ... 9.rar.html (32 MB)
You may also need a CD BIOS: http://emu-russia.net/en/files/bios/tgcd/

Then you need an emulator.
I tried the emulators from these pages:
http://www.zophar.net/tg16.html
http://www.zophar.net/multiem.html (Only those that mention TurboGrafx)

Those I could get to work are:
Hu6280 -- http://www.zophar.net/tg16/hu6280.html
You have to press F11 (the menu does not work) and select the ISO file.
The problem is that it is too fast.
Mednafen -- http://www.zophar.net/multiem/mednafen.html
You need to copy the file Super CD-ROM2 System V3.00 (J).pce (from the bios package) into the emulator's folder as syscard3.pce.
Then, pass the path to the CUE file in the command line.

Those that don't work:
* DeePCE -- Does not support CD games.
* DPCE -- Does not support CD games.
* TG16 EMU -- Does not support CD games.
* Hu-Go! -- Crashes when I select the ISO. (Segmentation Fault)
* Magic Engine -- Supports real CDs only.
* Ootake -- Copy the bios as "SYSCARD.pce".
Create a folder in the "install" folder named the same as the CUE file (without extension), and copy all game files there.
The BIOS starts, but it says "LOAD ERROR!" when I press enter.
* Project PC2E -- Supports real CDs only. It seems that Ootake is based on this.
* PCejin -- Copy the bios as "pce.cdbios".
Tries to open some file called "Prince of Persia (U).bin".
If I create an empty file with that name, then it says "WARN: 0 fewer than pregap (150) sectors in track 2".
* PicchioEngine -- Does not support CD games.
* TGEmu -- Does not support CD games.
* Turbo Engine -- Shows an error: "Error while loading CDROM game. If you are using a physical CD drive, make sure there is a CD in it."
If I delete all tracks from the CUE except the second: it shows an error message about the "File Cabinet", and then shows black screen.
* VPCE -- Does not support CD games.
* SmartGear -- Does not support CD games.
* YAME -- Does not support CD games.
* BizHawk -- I didn't try this one yet.

Re: How to run the TurboGrafx-16 / PC Engine version

Posted: October 2nd, 2016, 4:49 pm
by Norbert
Apparently this is possible with the TurboGrafx-16 version:
https://www.youtube.com/watch?v=1UDlBbVmJN4&t=92
https://www.youtube.com/watch?v=EIP41ZPkmcs&t=703

Okay... and this is not:
https://www.youtube.com/watch?v=1UDlBbVmJN4&t=98

Plus at least one room that's not in the original:
https://www.youtube.com/watch?v=1UDlBbVmJN4&t=129
(Maybe this was mentioned before somewhere on the forum.)

Re: How to run the TurboGrafx-16 / PC Engine version

Posted: October 8th, 2016, 12:48 pm
by David
Norbert wrote:Apparently this is possible with the TurboGrafx-16 version:
https://www.youtube.com/watch?v=1UDlBbVmJN4&t=92
https://www.youtube.com/watch?v=EIP41ZPkmcs&t=703
Grabbing a ledge after falling too much... :shock:
Norbert wrote: Okay... and this is not:
https://www.youtube.com/watch?v=1UDlBbVmJN4&t=98
No standing jump over 3 tiles? :?
Norbert wrote: Plus at least one room that's not in the original:
https://www.youtube.com/watch?v=1UDlBbVmJN4&t=129
(Maybe this was mentioned before somewhere on the forum.)
What, so this legendary place really exists? :)

It's on one of the covers, mentioned here: viewtopic.php?p=17874#p17874
Here is the cover: http://www.mobygames.com/game/prince-of ... Id,108788/

Re: How to run the TurboGrafx-16 / PC Engine version

Posted: October 8th, 2016, 3:55 pm
by David
David wrote: Hu6280 -- http://www.zophar.net/tg16/hu6280.html
You have to press F11 (the menu does not work) and select the ISO file.
The problem is that it is too fast.
In the INI file, set LIMIT=ON. That will change the speed to normal.
I wonder why isn't this the default.
David wrote: What, so this legendary place really exists? :)
And it does...
It's really on level 3 as the screenshot on the cover says.
(Say, is this the only version of PoP1 that continuously shows the level number?)

Re: How to run the TurboGrafx-16 / PC Engine version

Posted: October 9th, 2016, 10:01 am
by David
Norbert wrote:Apparently this is possible with the TurboGrafx-16 version:
https://www.youtube.com/watch?v=1UDlBbVmJN4&t=92
I found out that it was mentioned here: viewtopic.php?p=11007#p11007
_Zaphod_ wrote:But it's fun to abuse the ledge grab bug and speedrun level 8. :)

Re: How to run the TurboGrafx-16 / PC Engine version

Posted: November 2nd, 2016, 10:37 pm
by Norbert
David wrote:
Norbert wrote:Apparently this is possible with the TurboGrafx-16 version:
https://www.youtube.com/watch?v=1UDlBbVmJN4&t=92
https://www.youtube.com/watch?v=EIP41ZPkmcs&t=703
Grabbing a ledge after falling too much... :shock:
Yeah. Other versions have similar strange things. For instance the Sega Genesis version:
https://www.youtube.com/watch?v=3awmTtEaE2U&t=237
https://www.youtube.com/watch?v=3awmTtEaE2U&t=60 (both the jump and the patient guard)
I'm sure there are many more.

Re: How to run the TurboGrafx-16 / PC Engine version

Posted: January 21st, 2017, 7:18 pm
by David
It looks like the two extra rooms of level 3 also exist in the FM Towns version: https://youtu.be/YRm65857dmI?t=378

Re: How to run the TurboGrafx-16 / PC Engine version

Posted: January 22nd, 2017, 12:22 am
by _Zaphod_
that room is a trap. there is no way to collect that life extender potion and escape. even if you manage to leave the first loose tile, you cannot jump off of it in time to grab the ledge and climb back out. beleive me, i tried.

Re: How to run the TurboGrafx-16 / PC Engine version

Posted: January 22nd, 2017, 12:56 am
by Norbert
_Zaphod_ wrote:that room is a trap. there is no way to collect that life extender potion and escape. even if you manage to leave the first loose tile, you cannot jump off of it in time to grab the ledge and climb back out.
You can use the first part of this:


Re: How to run the TurboGrafx-16 / PC Engine version

Posted: January 22nd, 2017, 1:03 am
by _Zaphod_
have you actually tried it on the tg-16 version?

come back with a video of it there as proof.

Re: How to run the TurboGrafx-16 / PC Engine version

Posted: January 22nd, 2017, 1:28 am
by Norbert
_Zaphod_ wrote:have you actually tried it on the tg-16 version?
No, my mind was in DOS mode. :P
I just tested with the FM Towns.
Indeed, the trick does not work there.

Re: How to run the TurboGrafx-16 / PC Engine version

Posted: January 22nd, 2017, 1:30 am
by _Zaphod_
as i said. it's a trap. and it also shows an inaccuracy of the conversion. platforms fall too soon.

believe me i tried that first thing. standing jump onto the tile, jump straight up. only running onto the tile and jumping works. but because of the wall in the way, you can't clear both tiles when you jump down.

quite devious.

Re: How to run the TurboGrafx-16 / PC Engine version

Posted: January 22nd, 2017, 1:42 am
by Norbert
_Zaphod_ wrote:only running onto the tile and jumping works. but because of the wall in the way, you can't clear both tiles when you jump down
I am actually able to keep both loose tiles in place; reach the life potion without any loose tiles falling down.
I just tested this, not making it up. ;)
After you climb down and are behind the pillar, just jump right.
You will miss the wall and land to the right of both loose tiles.
But running onto the loose tiles and then trying to climb up doesn't work, unfortunately.
At least, I've tried it several times and it doesn't for me.

Re: How to run the TurboGrafx-16 / PC Engine version

Posted: January 22nd, 2017, 2:26 am
by _Zaphod_
yeah. those tiles fall extra fast it seems.

does it work elsewhere? it's been a while since i was able to get it running.

i guess i can hook up my real console.

Re: How to run the TurboGrafx-16 / PC Engine version

Posted: January 22nd, 2017, 3:47 am
by _Zaphod_
tried. you hit wall in tg-16 version.

on fm towns try running all the way into the wall before you jump up. it will probably bring you to an instant stop.